The i550 motec frequency inverter in the power range of 0.37 ... 45 kW for motor and wall mounting in protection class IP66 is the optimal decentralized drive solution.

Fast mounting and easy commissioning thanks to user-friendly tools as well as connections for commercially available connectors are the focus of this inverter. Parameters, drive behavior and usability correspond to our proven frequency inverters. Rounded off by high energy efficiency, we thus offer a modern and sustainable drive solution.

The requirements of the Ecodesign Directive, Standard EN 50598-2, are met.

Application areas: Conveyor drives, traveling drives, winding drives, hoist drives, extruders, packaging machines, pumps, fans, ...

Highlights

• Compact solution for decentralized drive technology, wall-mounted or motor-mounted

• High IP66 protection class for universal use even in harsh environments

• Fast mounting due to pluggable, standardized connections (plug & play)

• IO-Link master functionality for easy data exchange between IO-Link sensors and actuators

• Regenerative feedback mode integrated for very high energy efficiency - no brake resistor required

Technical data and features

Technical data

0.37 ... 45 kW

Connections

3 AC 230 V
3 AC 400 V
3 AC 480 V
2x digital input
2x digital input/digital output/IO-Link port
Holding brake control
Motor temperature monitoring
USB C

Communication

EtherCAT
EtherNet/IP
IO-Link
Modbus TCP
PROFINET

The Lenze Smart Motor reduces the number of different drive versions by up to 70%. Contactor and starter do not feature, fixed speeds can be set at will and there are numerous integrated functions for materials handling applications. The Lenze Smart Motor also complies with the highest energy efficiency requirements and can be very conveniently operated using a smartphone.

Highlights

• Freely adjustable speed reduces the number of different drives

• Integrated soft start function

• Reduced wiring due to electronic contactor and motor protection function

• Designs B3, B5 and B14

• Can be combined with g500 gearboxes

Technical data and features

Technical data

0.47 kW / 1.36 kW

1.75 Nm / 5 Nm

Version

B3

B5

B9

B14

The i510 cabinet frequency inverter is a compact control cabinet device with scalable functionality. It is versatile, reliable and easy to use.

The requirements of the Ecodesign Directive, Standard EN 50598-2, are met.

Application areas: Conveyor drives, traveling drives, pumps, fans, agitators., etc.

Highlights

• Space saving design: 60 mm wide (up to 4 kW), 130 mm deep (up to 11 kW), with zero-clearance mounting

• Innovative interaction (e.g. over WLAN) makes new record-breaking commissioning times and convenient diagnostics a reality

• Special user-friendliness

Technical data and features

Technical data

0.25 ... 15 kW

Connections

1 AC 230 V
3 AC 230 V
3 AC 400 V
3 AC 480 V
5x digital input
1x digital output
2x analog input
1x analog output
1x NO/NC relay

Communication

CANopen
Modbus RTU

The i550 cabinet frequency inverter is a compact control cabinet device with scalable functionality. It is versatile, reliable, and easy to use.

The requirements of the Ecodesign Directive, Standard EN 50598-2, are met.

Application areas: Conveyor drives, traveling drives, winding drives, hoist drives, extruders, packaging machines, pumps, fans, ...

Highlights

• Space saving design: 60 mm wide (up to 4 kW), 130 mm deep (up to 11 kW), with zero-clearance mounting

• Innovative interaction (e.g. over WLAN) makes new record-breaking commissioning times and convenient diagnostics a reality

• Optionally available with "Safe Torque Off (STO)" with SIL 3 (EN IEC 62061/EN IEC 61508) and Performance Level e (EN ISO 13849-1)

• For the greatest possible flexibility available as a complete device or in individual parts (Power Unit, Control Unit and Safety Unit)

Technical data and features

Technical data

0.25 ... 132 kW

Connections

1 AC 120 V
1 AC 230 V
3 AC 230 V
3 AC 400 V
3 AC 480 V
5x digital input
1x digital output
2x analog input
1x analog output
1x NO/NC relay
DC bus
Motor temperature monitoring

g500-H + m500 helical geared motors

The robust and universally applicable helical geared motors are an axial drive unit and comply with efficiency classes IE2 and IE3.

Thanks to the helical gearbox, they have high permissible radial forces, closely stepped ratios and low backlash.

Highlights

• Robust axial gearbox in a compact design

• Shaft dimensions in line with market standard and standardized flanges

• Can be used universally due to the market-oriented modular system

• Easy connection via terminal box or conventional plug-in connectors for fast commissioning

• Can be combined with i510 cabinet, i550 cabinet and i550 protec frequency inverters

Technical data and features

Technical data

0.12 ... 55 kW

3 ... 14000 Nm

Maximum ratio: i=3240

Version

2-, 3- and 4-stage

g500-S + m500 shaft-mounted helical geared motors

The slim and space-saving shaft-mounted helical geared motors are a simple plug-on drive unit and comply with efficiency classes IE2 and IE3.

Thanks to the shaft-mounted helical gearbox, they have high permissible radial forces, closely stepped ratios and low backlash.

Highlights

• Slim shaft-mounted gearbox in a compact design

• Shaft dimensions in line with market standard and standardized flanges

• Can be used universally due to the market-oriented modular system

• Easy connection via terminal box or conventional plug-in connectors for fast commissioning

• Can be combined with i510 cabinet, i550 cabinet and i550 protec frequency inverters

Technical data and features

Technical data

0.12 ... 55 kW

6 ... 19000 Nm

Maximum ratio: i=4640

Version

2-, 3- and 4-stage

g500-B + m500 bevel geared motors

The efficient bevel geared motors are a compact, powerful drive unit and comply with efficiency classes IE2 and IE3.

Thanks to the bevel gearbox, they have high permissible radial forces, closely stepped ratios and low backlash.

Highlights

• Highly efficient right-angle gearbox in a compact design

• Shaft dimensions in line with market standard and standardized flanges

• Can be used universally due to the market-oriented modular system

• Easy connection via terminal box or conventional plug-in connectors for fast commissioning

• Can be combined with i510 cabinet, i550 cabinet and i550 protec frequency inverters

Technical data and features

Technical data

0.12 ... 55 kW

6 ... 20000 Nm

Maximum ratio: i=2935

Version

2-, 3- and 4-stage

The intelligent i950 cabinet servo inverter can be easily integrated into modular machine solutions on the basis of prepared technology applications - parameterization instead of programming.

The same architecture, the same engineering and the use of the same application software, based on decades of application experience, dissolve the boundaries between centralized and decentralized motion control. Our FAST Application Software Toolbox becomes universally usable. If required, the pre-designed software modules can be very easily customized and extended.

In addition, the i950 cabinet servo inverter serves as a power extension of the i750 cabinet servo inverter in the Lenze automation system in the range from 22 to 110 kW.

The requirements of the Ecodesign Directive, Standard EN 50598-2, are met.

Highlights

• Prepared technology applications, e.g. table positioning, electronic gearbox, winder

• One Cable Technology (OCT)

• Modular scalability for feedback system and fieldbus connections

• Autotuning function for quick and easy controller adjustment

• Integrated safety technology with a wide range of functions, complies with up to SIL 3/PL e Cat. 4

Technical data and features

Technical data

0.37 ... 110 kW

Connections

1 AC 230 V

3 AC 230 V

3 AC 400 V

3 AC 480 V

4x digital input

1x digital output

1x analog input

Safe inputs for the connection of safety sensors

Safe outputs for safe feedback

DC bus

Motor temperature monitoring

Resolver/multi-encoder input for feedback (motor)

Resolver/multi-encoder input for feedback (load)

One Cable Technology (OCT) via HIPERFACE DSL®

Connection of safety-rated encoder systems

Communication

EtherCAT

Ethernet

EtherNet/IP

PROFINET

Safety bus FSoE

PROFIsafe safety bus on PROFINET

Operation with safety PLC

The i750 cabinet servo inverter provides everything for precise and dynamic motion control in complex multi-axis applications. Advanced safety functions and One Cable Technology reduce wiring and control complexity. Intelligent data-based functions and IIoT enable innovative motion control concepts.

As a single or double axis, the i750 cabinet with a matching supplier fits seamlessly into the Lenze automation system. The strengths of the inverter become apparent in numerous applications in combination with Lenze controllers and the FAST Application Software Toolbox. The scalable range of hardware, software, engineering services, and digital services supports the realization of integrated automation systems from the cloud to the drive shaft.

As a power extension of the i750 cabinet servo inverter in the range of 22 ... 110 kW, the i950 cabinet servo inverter can be used.

Highlights

• Integrated DC-bus connection

• Small overall width from 1.97 in for the double axis

• Axis modules capable of multiple overloads for peak output currents between 5 and 64 A, double axes up to 32 A

• Integrated Functional Safety and One Cable Technology (OCT)

• Autotuning function for quick and easy controller adjustment

Technical data and features (axis modules)

Technical data

Single axis: 1.1 ... 15 kW
Double axis: 1.1 ... 7.5 kW

Connections

DC supply range: 260 ... 775 V
(central mains connection via supply modules)
2x digital input
Holding brake control
Motor temperature monitoring
Resolver/multi-encoder input for feedback (motor)

Communication

EtherCAT

Technical data and features (supply modules)

Technical data

Output voltage: DC
Rated DC-bus current: 30 A and 60 A

Connections

3 AC 230 V
3 AC 400 V
3 AC 480 V
Brake resistor
3x digital input (permanently assigned)
2 x digital output (permanently assigned)

i750_cabinet_multi_axis_servo_inverter

The award-winning i550 protec frequency inverter uses the same tried-and-tested technology used in our control cabinet inverters. It only differs in terms of a higher degree of housing protection and an adapted design. If there is not enough space in the control cabinet or the inverter has to be mounted close to the motor in various machine modules, then this versatile and reliable device is the right solution. Thanks to the extension box, a disconnect switch and operating elements can be used.

The requirements of the Ecodesign Directive, Standard EN 50598-2, are met.

Application areas: Conveyor drives, traveling drives, winding drives, hoist drives, extruders, packaging machines, pumps, fans, ...

Highlights

• Decentralized drive with IO-Link interface V1.1

• Integrated diagnostic interface (micro USB) for service purposes

• Versions with or without repair switch, with keypad or WLAN module for easy commissioning

• Optionally available with "Safe Torque Off (STO)" with SIL 3 (EN IEC 62061/EN IEC 61508) and Performance Level e (EN ISO 13849-1)

Technical data and features

Technical data

0.37 ... 75 kW

Connections

1 AC 120 V
1 AC 230 V
3 AC 230 V
3 AC 400 V
3 AC 480 V
3 AC 600 V
5x digital input
1x digital output
2x analog input
1x analog output
1x NO/NC relay
DC bus
Motor temperature monitoring
Micro USB

g500-H + MCS helical geared motors

The robust and universally applicable, highly dynamic synchronous helical geared motors with good concentricity properties enable precise positioning with resolvers or single-cable encoders as feedback.

Thanks to the helical gearbox, they have high permissible radial forces, closely stepped ratios and low backlash.

Highlights

• Robust axial gearbox in a compact design

• Shaft dimensions in line with market standard and standardized flanges

• Ensure top performance in even the tightest of spaces

• Motor with high overload capacity and large angular accelerations

• Adjusted for a combination with servo inverter

Technical data and features

Technical data

0.25 ... 15.8 kW

3 ... 3000 Nm

Maximum ratio: i=3240

Version

2-, 3- and 4-stage

g500-S + MCS shaft-mounted helical geared motors

The slim and space-saving, highly dynamic synchronous shaft-mounted helical geared motors with good concentricity properties enable precise positioning with resolvers or single-cable encoders as feedback.

Thanks to the shaft-mounted helical gearbox, they have high permissible radial forces, closely stepped ratios and low backlash.

Highlights

• Slim shaft-mounted gearbox in a compact design

• Market standard shaft dimensions and standardized flanges

• Ensure top performance in even the tightest of spaces

• Motor with high overload capacity and large angular accelerations

• Adjusted for a combination with servo inverter

Technical data and features

Technical data

0.25 ... 15.8 kW

8 ... 4500 Nm

Maximum ratio: i=4640

Version

2-, 3- and 4-stage

• Home

• Products

• Geared motors

• g500 + MCS bevel geared motors

g500-B + MCS bevel geared motors

The efficient and highly dynamic synchronous bevel geared motors with good concentricity properties enable precise positioning with resolvers or single-cable encoders as feedback.

Thanks to the bevel gearbox, they have high permissible radial forces, closely stepped ratios and low backlash.

Highlights

• Highly efficient right-angle gearbox in a compact design

• Shaft dimensions in line with market standard and standardized flanges

• Ensure top performance in even the tightest of spaces

• Motor with high overload capacity and large angular accelerations

• Adjusted for a combination with servo inverter

Technical data and features

Technical data

0.25 ... 15.8 kW

6 ... 4300 Nm

Maximum ratio: i=2935

Version

2-, 3- and 4-stage

g500-H + m850 helical geared motors

The robust and universally applicable, compact synchronous helical geared motors suitable for medium dynamics with good concentricity properties enable precise positioning with resolvers or single-cable encoders as feedback.

Thanks to the helical gearbox, they have high permissible radial forces, closely stepped ratios and low backlash.

Highlights

• Robust axial gearbox in a compact design

• Shaft dimensions in line with market standard and standardized flanges

• Medium dynamics in a compact design

• Easy controllability by an advantageous ratio of the mass inertia of the load and that of the motor

• Adjusted for a combination with servo inverter

Technical data and features

Technical data

2 ... 9.2 kW

15 ... 3000 Nm

Maximum ratio: i=3240

Version

2-, 3- and 4-stage

g500-S + m850 shaft-mounted helical geared motors

The slim and space-saving, compact synchronous shaft-mounted helical geared motors suitable for medium dynamics with good concentricity properties enable precise positioning with resolvers or single-cable encoders as feedback.

Thanks to the shaft-mounted helical gearbox, they have high permissible radial forces, closely stepped ratios and low backlash.

Highlights

• Slim shaft-mounted gearbox in a compact design

• Shaft dimensions in line with market standard and standardized flanges

• Medium dynamics in a compact design

• Easy controllability by an advantageous ratio of the mass inertia of the load and that of the motor

• Adjusted for a combination with servo inverter

Technical data and features

Technical data

2 ... 9.2 kW

17 ... 4500 Nm

Maximum ratio: i=4640

Version

2-, 3- and 4-stage

g500-B + m850 bevel geared motors

The efficient and compact synchronous bevel geared motors suitable for medium dynamics with good concentricity properties enable precise positioning with resolvers or single-cable encoders as feedback.

Thanks to the bevel gearbox, they have high permissible radial forces, closely stepped ratios and low backlash.

Highlights

• Highly efficient right-angle gearbox in a compact design

• Shaft dimensions in line with market standard and standardized flanges

• Medium dynamics in a compact design

• Easy controllability by an advantageous ratio of the mass inertia of the load and that of the motor

• Adjusted for a combination with servo inverter

Technical data and features

Technical data

2 ... 9.2 kW

22 ... 4300 Nm

Maximum ratio: i=2935

Version

2-, 3- and 4-stage

g500-H + MCA helical geared motors

The robust and universally applicable, space-saving and dynamic asynchronous helical geared motors with a high construction-related operational reliability enable precise positioning with resolvers or single-cable encoders as feedback.

Thanks to the helical gearbox, they have high permissible radial forces, closely stepped ratios and low backlash.

Highlights

• Robust axial gearbox in a compact design

• Shaft dimensions in line with market standard and standardized flanges

• Dynamic applications easily solved

• Motor with low moments of inertia

• Adjusted for a combination with servo inverter

Technical data and features

Technical data

0.8 ... 20.3 kW

9 ... 3000 Nm

Maximum ratio: i=3240

Version

2-, 3- and 4-stage

g500-B + MCA bevel geared motors

The efficient, space-saving, dynamic asynchronous bevel geared motors with high construction-related operational reliability enable precise positioning with resolvers or single-cable encoders as feedback.

Thanks to the bevel gearbox, they have high permissible radial forces, closely stepped ratios and low backlash.

Highlights

• Highly efficient right-angle gearbox in a compact design

• Shaft dimensions in line with market standard and standardized flanges

• Dynamic applications easily solved

• Motor with low moments of inertia

• Adjusted for a combination with servo inverter

Technical data and features

Technical data

0.8 ... 20.3 kW

10 ... 4300 Nm

Maximum ratio: i=2935

Version

2-, 3- and 4-stage

g500-S + MCA shaft-mounted helical geared motors

The slim, very space-saving, dynamic asynchronous shaft-mounted helical geared motors with high construction-related operational reliability enable precise positioning with resolvers or single-cable encoders as feedback.

Thanks to the shaft-mounted helical gearbox, they have high permissible radial forces, closely stepped ratios and low backlash.

Highlights

• Slim shaft-mounted gearbox in a compact design

• Shaft dimensions in line with market standard and standardized flanges

• Dynamic applications easily solved

• Motor with low moments of inertia

• Adjusted for a combination with servo inverter

Technical data and features

Technical data

0.8 ... 20.3 kW

10 ... 4500 Nm

Maximum ratio: i=4640

Version

2-, 3- and 4-stage

c520 controller

The c520 controller enables you to conveniently solve high-quality control tasks for coordinated movement of multiple axes with high dynamics. Thus, modern and modular machine controls can be implemented based on our software modules.

Highlights

• High computing power for demanding motion control in compact machines

• Maintenance-free and more resistant: The battery-free design and the extended ambient operating temperature to 140 °F (60 °C) are the guarantors of a use in all areas of industry

• The engineering tools are the same as for all the other Lenze products which enables you to continue to use the tools you are familiar with

• Optional fieldbus extension

• Ready for state-of-the-art web-based machine visualizations in combination with EASY UI Designer and v430/v450 web panel

Technical data and features

Processor

Intel® Atom™ 1.6 GHz

Operating system

RT Linux

Communication

EtherCAT master
EtherCAT slave
PROFINET IO-Device
Ethernet 1000 Mbps